Functions & Specs

Backlight Function

Default when screen comes on is the backlight is off.

Hold C-Button for 1 second to turn on light. 

Continue holding C-Button to cycle through 5 brightness settings, increasing in brightness and then back to off. 

Brightness
Level 1: Min
Level 2: 25%
Level 3: 50%
Level 4: 75%
Level 5: Max

Recommended to keep on lowest setting needed for environment.

Triple tap the C-Button and on last tap hold C-Button for 1 Second and the backlight turn off.

6 LED's are positioned across the right side of screen for the Backlight.

FX Function

All Digimon warnings and alarms will flash screen with FX Light.

Digimon actions such as Battles, training, and more will have FX Light synced to Digimon Audio. 

Default setting is FX light for FX.

Rapidly tap on C-Button change the FX setting. 

FX Settings are:
1: FX Light used for FX (Default)
2. Backlight used for FX
3. No FX

2 LED's are positioned in the center of the right side of screen for FX.

Auto Timeout Function

Backlight will auto-off when the Digimon screen times out if you forget to leave it on.

Technical Specs

Pick each LED instructions - Design a custom look

DIGIMON LIGHT MOD: Layout and Schematics

CR2032 Battery Life Science

Battery @ 2.8V
IC Sleep Current during Screen Off    0.0007mA
IC Idle Current during Screen On       1.54mA
Lighting Current                                  3 mA - 14 mA

Battery @ 2.2V
IC Sleep Current during Screen Off    0.0007mA
IC Idle Current during Screen On       2.14mA
Lighting Current                                  4 mA - 16 mA

Dimensions:

PCB 24.4mm x 14.4mm x 3mm

Screen Panels 23.9mm x 27.8mm x 1.2mm